SHOE-TRACK 7T4607 - Caterpillar

Illustration 1 g01129649
(1) Up key (2) Right key (3) Home key (4) Main menu key (5) Left key (6) Down key (7) Back key (8) OK key
From the default screen, press the menu key (4) .
From the "MAIN MENU" screen, use the right key (2) to scroll through the menu options. When the "SERVICE" is highlighted, press the OK key (8) .The password screen will now be displayed.
Illustration 2 g01149075
When the correct password has been entered, the service menu will be displayed indicating that the service mode has been entered.
Illustration 3 g01131216
Select the "DIAGNOSTIC" option by using the up key (1) or the down key (6) .
When the "DIAGNOSTIC" menu option is highlighted press the OK key (8) .
Illustration 4 g01131232
Highlight the "ACTIVE ERROR" option from the "DIAGNOSTIC" menu. Refer to Illustration 4. When "ACTIVE ERROR" is highlighted press the OK key (8) .
Illustration 5 g01131217
The "ACTIVE ERROR" screen contains a list of all the active errors. The list contains information for the following:MID - (MMM) The MID is the code for the module identifier.CID - (CCCC) The CID is the code for the component identification.FMI - (FF) The FMI is the failure mode identifier.
Use the up key (1) and the down key (6) in order to scroll through the list of active errors. Tables 1 and 2 contain typical examples of MID and FMI codes.
Table 1
Module Identification (MID)    
Number For The Module     Module    
27 (0x001B)     Power Train ECM    
39 (0x0027)     Machine ECM    
36 (0x0024)     Engine ECM    
30 (0x001E)     Caterpillar Monitoring System    
Table 2
Failure Mode Identifier    
FMI     Description    
00     Data valid but above normal operating range    
01     Data valid but below normal operating range    
02     Data erratic, intermittent or incorrect    
03     Voltage above normal    
04     Voltage Below Normal    
05     Current Below Normal    
06     Current Above Normal    
07     Mechanical system not responding properly    
08     Abnormal frequency, pulse, or period    
09     Abnormal update rate    
10     Abnormal rate of change    
11     Failure mode not identifiable    
12     Bad device or component    
13     Out of calibration    
14     Special Instruction    
15     Data valid but above normal operating range    
16     Data valid but above normal operating range    
17     Data valid but below normal operating range    
18     Data valid but below normal operating range    
19     Received network data in error    
20 - 30     Reserved    
31     Not available or condition exists