SHOE -TRACK 8E4433 - Caterpillar

Illustration 1 g01869781
Press the down arrow key or the up arrow key in order to select the correct .cfg file.
Press the "OK" key. The AccuGrade system sends the .cfg file to the system and provides status information. The following text shows on the dialog in Illustration 2.
"Loading. Please wait ..."You then return to the "Setup Menu – Configuration" dialog.You must wait a few minutes while the GPS receiver gains lock.Make sure that you check the GPS configuration file was properly sent. In order to do this, position the center of the bucket focus tip (left, center, or right) on a known point and compare the coordinates that appear on the display with the known coordinates of the point.
Illustration 2 g01869793
The following information applies ONLY to "Dual GPS Mode".
A soft key has been added to the "GPS Receiver Configuration" screen. The "CMRs: CAN" soft key has been added in order to eliminate communication jump width conflicts.The conflicts can result in a "No GPS right" fault occurrence. An alternate CAN line can be enable for communication between the right GPS receiver and the left GPS receiver in order to eliminate receiver jump width conflicts. "CAN 0" or "CAN 1" can be selected by pressing the "CMRs: CAN" soft key.