SHOE AS-LINED 9C5968 - Caterpillar

Function and Navigation Keys
ReferenceThe call outs in this section are related to the EMCP 3 control panel illustration in the Systems Operation, RENR7902, "Electronic Control Module (Generator Set)" section.The keys listed below are used for programming the EMCP 3 and navigating within the menu structure.ReferenceRefer to Systems Operation, RENR7902, "Electronic Control Module (Generator Set)" section for an explanation of the function keys and the navigation keys. The function keys include the enter and escape keys. The navigation keys include the scroll left, scroll right, scroll up, and scroll down) keys.Escape (9) - Used to navigate up (backward) through the menu structure and to back out of data entry screens during set point programming.Enter key (10) - Select a highlighted menu item or save a programmed value.Scroll Right key (11) - During numeric data entry, choose the digit to edit. During certain set point adjustments, select or deselect a check box.Scroll Down key (12) - Move down through the main menu or navigate within a list in order to highlight one of the items. Also used to decrement digits (0-9).Scroll Up key (13) - Move up through the main menu or navigate within a list in order to highlight one of the items. Also used to increment digits (0-9).Scroll Left key (14) - During numeric data entry, choose the digit to edit. During certain set point adjustments, select or deselect a check box.Programming the Time and Date
The EMCP 3 allows the time and the date to be changed. If the time and the date are changed, then the time and the date will change the timestamp on all future events. However, the time and the date will change will not for existing events.Programming the time and date must be performed on the EMCP 3 display. Cat ET Service Tool cannot be used in order to update the time or the date. A "Level 1 Access" is required in order to perform the date and the time changes. Refer to the "Password Entry" section of this document in order to enter "Level 1 Access".Perform the following steps in order to access and in order to change the time and the date.Change the Time
From the "MAIN MENU", press the scroll up key or the scroll down key in order to highlight "CONFIGURE".
Press the enter key in order to select "CONFIGURE".
Press the scroll down key in order to highlight "TIME/DATE".
Press the enter key in order to select "TIME/DATE". The "SET TIME/DATE" screen will appear. The time that is currently programmed will have a box around the time that is shown on the "TIME/DATE" screen.Note: The current date that is programmed into the EMCP 3 will also be displayed within the "SET TIME/DATE" screen.
Press the scroll down key in order to place the box, that is on the screen, around the time. Refer to Illustration 1.
Illustration 1 g01451976
With the box placed around the time, press the enter key in order to begin editing the time. A screen will appear that is similar to Illustration