SHOE AS-LINED 9C9842 - Caterpillar

Disassembly Procedure
Start By:
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Place an index mark on all of the components for the assembly procedure.
Illustration 1 g00545460
Typical example
Remove elbow (1) and the O-ring seal.
Remove two bolts (2) .
Remove hose assembly (3) and the gasket.
Illustration 2 g00545463
Typical example
Remove six bolts (4) .
Remove three clamps (5) .
Separate compressor housing (6) from cartridge (7) .
Illustration 3 g00545464
Typical example
Illustration 4 g00545505
Typical example
Remove six bolts (8) .
Remove three clamps (9) .
Separate cartridge (7) from turbine housing (10) .