SHOE AS 9J5332 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01403616
Illustration 2 g01405900
Attach Tooling (A) and a suitable lifting device to engine oil tank (10). The weight of engine oil tank (10) is approximately 63 kg (140 lb). Position engine oil tank (10). Install bolts (11).
Illustration 3 g01403612
Connect hose assemblies (9).
Illustration 4 g01403613
Install panel (8).
Illustration 5 g01403615
Connect harness assemblies (7). Install clips (6).
Illustration 6 g01403609
Install panel (5).
Illustration 7 g01403607
Install covers (1). Close doors (4). Install supports (2). Install grates (3).
Fill the oil renewal system. Refer to Operation and Maintenance Manual, "Oil Renewal System Oil Level - Check ".