SHOE 9K9870 - Caterpillar

Which Generate This Code:The Electronic Control Module (ECM) detects the following condition:
Engine coolant temperature is greater than 107 °C (225 °F) for at least 15 seconds.System Response: The engine will shut down if the "Engine Monitoring Mode" is programmed to "Shut Down".
Engine shutdown
There may be a problem with the cooling system.
There may be a problem with the coolant temperature sensor.Test Step 1. Test the Cooling System
Test the cooling system for an overheating condition. Refer to Systems Operation/Testing and Adjusting, "Cooling System - Check".
Check for the following conditions: improper engine operation, excessive load, extreme ambient temperatures, restriction in the air inlet system and restriction in the exhaust system.Expected Result:There are no problems with the engine's cooling system.Results:
OK - The cause of the problem has not been identified.Repair: Refer to Troubleshooting, "Engine Sensor Open/Short Circuit - Test" in order to test the operation of the coolant sensor.STOP
Not OK - The problem with the cooling system has been identified.Repair: Repair the problem. Ensure that the repair eliminates the problem.STOP