SHOE-TRACK MASTER 9N4502 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5F-4764 Pry Bar 1 Start By:
Remove the rocker shafts. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01009601
Disconnect hose assemblies (1).
Drain the fuel from the cylinder head.
Illustration 2 g01009613
Disconnect harness assembly (2) from unit injector (3).
Remove bolt (4).
Position a Tooling (A) under bracket (5) in order to remove the unit injector (3).