SHOE-TRACK MASTER 9W1867 - Caterpillar

Monitoring System
Illustration 1 g01143406
(1) Up key (2) Right key (3) Home key (4) Main menu key (5) Left key (6) Down key (7) Back key (8) OK keyThe ECM uses the main display module on the Monitoring System for showing diagnostic information to service personnel. Diagnostic information concerning the ECM is sent on the Cat Data Link to the Monitoring System. Service personnel must be familiar with the Monitoring System in order to troubleshoot the ECM.
Illustration 2 g01131216
"Service" screenFor troubleshooting the ECM, access the "Service" screen of the Monitoring System. Select the "Diagnostic" option. See Illustration 2.See Troubleshooting, "Using the Operator Monitor to Determine Diagnostic Codes".The Caterpillar Electronic Technician (ET)
Illustration 3 g00777826
The Caterpillar Electronic Technician (ET) is a software program that is used to access data. The service technician can use the Caterpillar Electronic Technician in order to perform maintenance work on the machine. Some of the options that are available with the Caterpillar Electronic Technician are listed:
View Diagnostic codes. See Troubleshooting, "Using the Caterpillar Electronic Technician to Determine Diagnostic Codes".
View the status of parameters.
Clear active diagnostic codes and clear logged diagnostic codes
Perform calibration of machine systems.
Program the ECM (Flash). This is done with the "WINflash" program. See Testing and Adjusting, "Electronic Control Module (ECM) - Flash Program".
Print reports.The following list contains some of the diagnostic functions and programming functions that are performed by the service tools.
The failures of the ECM system are displayed.
The status of most of the inputs and the outputs are displayed.
The settings for the ECM are displayed.
Display the status of the input and output parameters in real time.
Display the clock hour of the internal diagnostic clock.
The number of occurrences and the clock hour of the first occurrence and the last occurrence is displayed for each logged diagnostic code.
The definition for each logged diagnostic code and each event is displayed.
Load new FLASH software.See Troubleshooting, "Diagnostic Code List" for the list of diagnostic codes for the ECM.See Troubleshooting, "Using the Caterpillar Electronic Technician to Determine Diagnostic Codes". Diagnostic information is accessed with the following drop down menus:
Active diagnostic codes
Logged diagnostic codesStatus Groups and Electronic Technician (ET) Overrides
The Status groups are lists of machine parameters. The status of the parameters are shown in real time.
Illustration 4 g01240062
Typical ET Status screen
Illustration 5 g01244194
Typical ET Override screen