SHORT BLOCK 20R4299 - Caterpillar

Illustration 3 g00970168
Install sensor (17), yoke (16), retainer (15), and bolt (14). Tighten bolts (14) to a torque of 105 15 N m (77 11 lb ft).
Illustration 4 g00973959
Attach Tooling (B) and a suitable lifting device to torque converter housing (11). Raise torque converter housing (11). The weight of torque converter housing (11) is approximately 154 kg (340 lb). Install Tooling (A) in order to support torque converter housing (11).
Illustration 5 g00974379
Align torque converter housing (11) to flywheel housing (13).
Illustration 6 g00970161
Apply Tooling (F) to bolts (12). Install bolts (12). Tighten bolts (12) to a torque of 55 10 N m (41 7 lb ft).
Illustration 7 g00970159
Remove Tooling (B) and the suitable lifting device from torque converter housing (11).
Illustration 8 g00970157
Illustration 9 g00970155
Remove Tooling (A) and install bolts (10). Tighten bolts (10) to a torque of 55 10 N m (41 7 lb ft).
Illustration 10 g00970150
Install bolt (9).
Illustration 11 g00970146
Connect hose (8).
Illustration 12 g00970142
Install bolt (7).
Illustration 13 g00970138
Install bolt (6).
Illustration 14 g00970134
Connect harness assemblies (5).
Illustration 15 g00970129
Install bolts (3) that retain harness assembly (4).
Illustration 16 g00970125
Connect hose assemblies (2).
Illustration 17 g00970122
Connect hose assembly (1). End By:
Install the power train oil pump. Refer to Disassembly and Assembly, "Power Train Oil Pump - Install".
Install the piston pump (implement). Refer to Disassembly and Assembly, "Piston Pump (Implement) - Install".
Install the main drive shaft. Refer to Disassembly and Assembly, "Main Drive Shaft - Remove and Install".