1127253 SHROUD AS Caterpillar parts
854G, 992G
Rating:
Alternative (cross code) number:
CA1127253
112-7253
1127253
CA1127253
112-7253
1127253
Weight: 115 pounds 52 kg.
WHEEL DOZER, WHEEL LOADER,
Number on catalog scheme:
3
For full view, you need register
Information:
Bosch VP30
Note: Parts that are inside of the fuel injection pump are only serviceable by an authorized Bosch dealer. Please consult your parts book for availability of parts on the outside of the pump that are not related to the settings of the fuel pump and for the possibility of remanufacturing options.
Illustration 1 g00925395 (1) O-ring Note: Lubricate the O-ring with clean engine oil before installing the fuel injection pump in the timing case. (2) Locking screw Unlocked pump shaft Tighten the locking screw when the spacer is installed to the following torque. ... 12 N m (9 lb ft)Locked pump shaft Tighten the locking screw when the spacer is not installed to the following torque. ... 31 N m (23 lb ft) (3) Spacer
Illustration 2 g01367062 (4) Tighten the bolt for the support bracket to the following torque. ... 44 N m (32 lb ft)Note: Ensure that force is not applied to the fuel injection pump when you are tightening the bolt for the support bracket.Tighten the three mounting bolts for the fuel injection pump to the following torque. ... 25 N m (18 lb ft)Note: Some Bosch VP30 fuel injection pumps do not have a locking screw. Refer to Systems Operation, Testing and Adjusting, "Fuel Injection Timing - Check" for the correct procedure.
Note: Parts that are inside of the fuel injection pump are only serviceable by an authorized Bosch dealer. Please consult your parts book for availability of parts on the outside of the pump that are not related to the settings of the fuel pump and for the possibility of remanufacturing options.
Illustration 1 g00925395 (1) O-ring Note: Lubricate the O-ring with clean engine oil before installing the fuel injection pump in the timing case. (2) Locking screw Unlocked pump shaft Tighten the locking screw when the spacer is installed to the following torque. ... 12 N m (9 lb ft)Locked pump shaft Tighten the locking screw when the spacer is not installed to the following torque. ... 31 N m (23 lb ft) (3) Spacer
Illustration 2 g01367062 (4) Tighten the bolt for the support bracket to the following torque. ... 44 N m (32 lb ft)Note: Ensure that force is not applied to the fuel injection pump when you are tightening the bolt for the support bracket.Tighten the three mounting bolts for the fuel injection pump to the following torque. ... 25 N m (18 lb ft)Note: Some Bosch VP30 fuel injection pumps do not have a locking screw. Refer to Systems Operation, Testing and Adjusting, "Fuel Injection Timing - Check" for the correct procedure.
Caterpillar parts catalog:
Parts shroud Caterpillar catalog:
1127252
SHROUD GP-RADIATOR
854G, 992G
854G, 992G
1794428
SHROUD
824G II, 824H, 825G II, 825H, 950G, 962G, 966G, 972G, 980G
824G II, 824H, 825G II, 825H, 950G, 962G, 966G, 972G, 980G
1170674
SHROUD
950F II
950F II
1221557
SHROUD
345B L, 950F II
345B L, 950F II
1164427
SHROUD
966F II, 970F
966F II, 970F
9U0412
SHROUD-LH
950F
950F
9U0411
SHROUD-RH
950F
950F
324D, 324D L, 325D L, 330D L, 336D, 336D L, 336D2, 336D2 L, 336E L, 345C, 345D L, 349D L, 349E L, 349E L VG, 365B II, 365C, 374D L, 374F L, 988K, 990H, 990K, 992G
324D L, 325D L, 330D L, 336D L, 336D2, 336D2 L, 336E L, 345C, 345D L, 349D L, 349E L, 349E L VG, 365B II, 365C, 374D L, 374F L, 988K, 990H, 990K, 992G
2400105
SHROUD AS
966H, 972H, 980C
966H, 972H, 980C
1860119
SHROUD AS
950G II, 962G II
950G II, 962G II
1835496
SHROUD AS-FAN
966G II, 972G II
966G II, 972G II
1317812
SHROUD AS-FAN
834G, 834H, 988G, 988H, AD55B, AD60
834G, 834H, 988G, 988H, AD55B, AD60