SHROUD AS 1362277 - Caterpillar

Introduction
This Special Instruction is organized into modules. Caterpillar suggests installing one module at a time.Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.Safety Section
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag to the start switch or to the controls before you service the equipment . These warning tags (Special Instruction, SEHS7332) are available from your Cat dealer.Required Parts
Table 1
492-1508 Auxiliary Control Ar
for
349-2008 Auxiliary Control Ar
Item Part No. Description Media No.
1 327-7487 Foot Pedal Gp M0067296
2 344-0846 Film Gp —
3 360-6218 Electronic Control Wiring Gp M0067298 Set Tool Flows and Pressures
Reference: Excavators Tool Control SystemTesting and Adjusting, KENR9616, "Process for Setting Up the Work Tool"Installation of the 344-0846 Film Gp
Install decals in the locations shown. This film group should be placed on the right-hand window inside the cab as shown.
Illustration 2 g06025601