1571027 SHROUD Caterpillar parts
385B, 385C L, 390D, 390D L, 390F L, 992K, 993K, R1300G, R1600G, R1600H, R1700G, R2900G, R3000H
Rating:
Alternative (cross code) number:
CA1571027
157-1027
1571027
CA1571027
157-1027
1571027
Weight: 62 pounds 28 kg.
EXCAVATOR, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$445.98
02 Dec 2023
US: Fast 404
1571027 Shroud-Heel Fits CATERPILLARR Models 1571027
BSlocator mpn: 1571027
BSlocator mpn: 1571027
$191.61
05 Dec 2022
Amazon.com
CTP 1571027 Shroud-Heel for Heavy Equipment
CTP Sold in each || Highly Efficient || Easy in-and-out fit
CTP Sold in each || Highly Efficient || Easy in-and-out fit
$189.29
22 Nov 2022
Amazon.com
CTP 1571027 Shroud-Heel for Heavy Equipment
CTP Sold in each || Highly Efficient || Easy in-and-out fit
CTP Sold in each || Highly Efficient || Easy in-and-out fit
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 1571027:
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00570915
Place the lifter body (1) in a hydraulic press.
Apply engine oil to the internal bore of the lifter body (1) and the adapter bores (2). Press the adapter (2) into the body (1). The top of the adapter should be flush with the top of the body (1) after assembly.
Illustration 2 g00570916Note: Place shims between the lifter and the roller when the pin is installed. This is necessary in order to prevent the forks on the body from bending.
Place the roller (5) between the forks of the lifter (4). Place both parts in a press with the lockwire groove on the top side.
Install the wire in the pin (3) with equal excess on each side.
Lubricate the pin (3) with clean engine oil.
Align the wire with the groove on the fork of the lifter (4).
Press the pin (3) into the lifter (4) and the roller (5).
Install the pushrod insert in the lifter body (4).
Raise the temperature of the intake lifter body and raise the temperature of the exhaust lifter body to 177 °C (350 °F). Lower the temperature of the pins to −60 °C (−76 °F).
Always wear protective gloves when handling parts that have been heated.
Illustration 3 g00570917
Install a new guide spring (9) and guide spring (11) on the lifters. Note: If the guide springs were removed from the valve lifters, the guide springs must not be used again.
Illustration 4 g00626748
The roller is not installed on the valve lifter that is shown in the illustration.
Install the insert (13) in the body (14) with the lifter cup that faces outward. Install the new O-ring retainer (12) in order to hold the insert in place.
Immerse the following lifters in clean engine oil: (7), (8) and (10).
Install the valve lifter (7) and the valve lifter (10) in the original positions. Install the valve lifters so that the guide spring will be in the proper position. Note: Use large pliers in order to compress the guide springs (11) so that the valve lifter assemblies can be installed in the body of the valve guide (6).
Install the gas admission valve lifter (8). End By:
Install the valve lifter assembly.
Install the push rods.
Check the valve lash.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00570915
Place the lifter body (1) in a hydraulic press.
Apply engine oil to the internal bore of the lifter body (1) and the adapter bores (2). Press the adapter (2) into the body (1). The top of the adapter should be flush with the top of the body (1) after assembly.
Illustration 2 g00570916Note: Place shims between the lifter and the roller when the pin is installed. This is necessary in order to prevent the forks on the body from bending.
Place the roller (5) between the forks of the lifter (4). Place both parts in a press with the lockwire groove on the top side.
Install the wire in the pin (3) with equal excess on each side.
Lubricate the pin (3) with clean engine oil.
Align the wire with the groove on the fork of the lifter (4).
Press the pin (3) into the lifter (4) and the roller (5).
Install the pushrod insert in the lifter body (4).
Raise the temperature of the intake lifter body and raise the temperature of the exhaust lifter body to 177 °C (350 °F). Lower the temperature of the pins to −60 °C (−76 °F).
Always wear protective gloves when handling parts that have been heated.
Illustration 3 g00570917
Install a new guide spring (9) and guide spring (11) on the lifters. Note: If the guide springs were removed from the valve lifters, the guide springs must not be used again.
Illustration 4 g00626748
The roller is not installed on the valve lifter that is shown in the illustration.
Install the insert (13) in the body (14) with the lifter cup that faces outward. Install the new O-ring retainer (12) in order to hold the insert in place.
Immerse the following lifters in clean engine oil: (7), (8) and (10).
Install the valve lifter (7) and the valve lifter (10) in the original positions. Install the valve lifters so that the guide spring will be in the proper position. Note: Use large pliers in order to compress the guide springs (11) so that the valve lifter assemblies can be installed in the body of the valve guide (6).
Install the gas admission valve lifter (8). End By:
Install the valve lifter assembly.
Install the push rods.
Check the valve lash.
Cat SIS web machinery list:
Parts shroud Caterpillar catalog:
385B, 385C L, 390D, 390D L, 390F L, 992K, 993K, R1300G, R1600G, R1600H, R1700G, R2900G, R3000H
2517867
SHROUD AS
R2900G, R3000H
R2900G, R3000H
3177941
SHROUD
R1700G, R2900G, R3000H
R1700G, R2900G, R3000H
3177942
SHROUD
R1700G, R2900G, R3000H
R1700G, R2900G, R3000H
3177946
SHROUD
R1700G, R2900G, R3000H
R1700G, R2900G, R3000H
2927708
SHROUD
R1700G
R1700G
1869558
SHROUD
R1600, R1600G
R1600, R1600G
3860008
SHROUD AS
R1600H
R1600H
3860009
SHROUD AS-TOP
R1600H
R1600H
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1719005
SHROUD AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
3607710
SHROUD-RADIATOR
374F L, 390F L
374F L, 390F L
385B, 385C L, 390D, 390D L, 390F L, 992K, 993K, R1300G, R1600G, R1600H, R1700G, R2900G, R3000H
2790415
SHROUD AS
854K, 992K
854K, 992K
2342441
SHROUD AS
980H
980H
324D, 324D L, 325D L, 330D L, 336D, 336D L, 336D2, 336D2 L, 336E L, 345C, 345D L, 349D L, 349E L, 349E L VG, 365B II, 365C, 374D L, 374F L, 988K, 990H, 990K, 992G
324D L, 325D L, 330D L, 336D L, 336D2, 336D2 L, 336E L, 345C, 345D L, 349D L, 349E L, 349E L VG, 365B II, 365C, 374D L, 374F L, 988K, 990H, 990K, 992G
2400105
SHROUD AS
966H, 972H, 980C
966H, 972H, 980C
3218406
SHROUD AS
980K, 980K HLG
980K, 980K HLG
3208854
SHROUD AS
966K, 972K
966K, 972K
3596350
SHROUD
950K, 962K
950K, 962K
2636404
SHROUD AS
140G, 525C, 535C, 545C, 815B
140G, 525C, 535C, 545C, 815B