SHROUD 2955876 - Caterpillar

Standard Seat Adjustment
Raise the left console in order to make the hydraulic controls inoperable. This will prevent any possibility of unexpected movement of the machine.Adjust the seat at the beginning of each work period. Adjust the seat when you change operators. The seat should be adjusted so that full pedal travel is allowed while an operator is seated against the back of the seat.Always use the seat belt when you operate the machine.
Illustration 1 g00291775
The seat position can be adjusted forward and backward. The seat position can be adjusted up and down. The operator may also adjust the seat back tilt. Select the desired position in order to allow full pedal travel and full lever travel.
Illustration 2 g00291776
(1) Seat cushion tilt lever (2) Fore/Aft seat adjustment lever (3) Adjustment knob for seat suspension (4) Fore/Aft adjustment for operator stationTo adjust the seat cushion tilt upward, pull up lever (1) and hold lever (1). Tilt the seat cushion to the desired upward position. Release lever (1) in order to lock the seat cushion in the selected position.To adjust the seat cushion tilt downward, pull down lever (1) and hold lever (1). Tilt the seat cushion to the desired downward position. Release lever (1) in order to lock the seat cushion in the selected position.To adjust the seat forward or backward, pull up lever (2) and hold lever (2). Move the seat to the desired position. Release lever (2) in order to lock the seat in the selected position.To adjust the seat suspension, turn knob (3) until the dial indicator shows the approximate weight of the operator. The adjustment knob has a range of 50 to 120 kg (110 to 265 lb). Turn adjustment knob (3) clockwise in order to increase the reading. Turn adjustment knob (3) counterclockwise in order to decrease the reading.To adjust the operator station forward or backward, pull up lever (4) and hold lever (4). Move the operator station to the desired position. Release lever (4) in order to lock the operator station in the selected position. The operator station includes the seat, the left console and the right console.
Illustration 3 g00291778
(5) Knob for seat back tilt (6) Dial for adjusting the angle of the armrestTo adjust the seat back tilt to the desired position, turn knob (5) .To adjust the angle of the armrest, operate dial (6). A dial is on the bottom of each armrest. Place the left console in the upright position when you enter the machine or when you exit the machine.Pneumatic Seat Adjustment (If Equipped)
On the pneumatic seat, the seat suspension, upper lumbar support and lower lumbar support can be adjusted. The other adjustments for the pneumatic seat are similar to the standard seat. Refer to "Standard Seat Adjustment".
Illustration 4 g00103196
(7) Switch for adjusting seat suspension (8) Switch for adjusting the lower lumbar chamber (9) Switch for adjusting the upper lumbar chamberTo adjust seat suspension, use switch (7). Push switch (7) on the "+" or on the "-" for the desired suspension.To adjust the lower