SHROUD 4593944 - Caterpillar

4593944 SHROUD Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4593944
459-3944
4593944

Weight: 6 pounds 2 kg.

Buy SHROUD 4593944 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 15

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 140-7742 Sleeve 1
B 138-7573 Link Bracket 1 Start By:
Remove the engine enclosure. Refer to Disassembly and Assembly, "Engine enclosure - Remove and Install".
Remove the hydraulic oil cooler. Refer to Disassembly and Assembly, "Hydraulic Oil Cooler - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Illustration 1 g01410062
Remove bolt (1). Remove bolts (2) and bracket assembly (3) .
Illustration 2 g01410066
Remove hose (4). Remove bolts (5) .
Repeat Step 2 for the other side.
Illustration 3 g01410179
Use a suitable lifting device and Tooling (A) in order to support bracket assembly (6). Remove bolts (9). Remove bracket (8). Remove bolts (7) and bracket assembly (6) .
Illustration 4 g01410321
Remove bolts (11). Reposition core assembly (10). Remove bolt (12) .
Repeat Step 5 for the other side. Remove plate (13) .
Illustration 5 g01410339
Remove hose (14). Remove bolt (15) .
Repeat Step 7 for the other side. Remove plate (16) .
Illustration 6 g01410357
Illustration 7 g01410576
Attach Tooling (B) and a suitable lifting device to aftercooler (17). Remove bolts (18) and aftercooler (17). The weight of aftercooler (17) is approximately 18 kg (40 lb).