AVSPARE.COM
parts catalog

SHROUD-LIP 4695706 - Caterpillar


4695706 SHROUD-LIP Caterpillar parts
Rating:
86
Alternative (cross code) number:
CA4695706
469-5706
4695706
Caterpillar 4695706 SHROUD-LIP
Weight: 340 pounds 154 kg.

Buy SHROUD-LIP 4695706 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.
Illustration 1 g02535096
Open the engine access door on the left side of the machine.
Illustration 2 g03322656
Check the dipstick (2) while the engine is stopped. Maintain the oil level between the "LOW" mark and the "FULL" mark. Note: When you operate the machine on severe slopes, the oil level in the engine crankcase must be at the "FULL" mark on the dipstick.
Remove oil filler cap (1). If necessary, add oil.
Clean the oil filler cap and install the oil filler cap.
Close the access door. Note: For the best results, check that the engine oil level after the engine has been off for 2 hours or more. This action will allow all of the oil to drain back into the engine crankcase.


Parts shroud Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.