4I7375 SHROUD AS Caterpillar parts
311, 312
Rating:
Alternative (cross code) number:
CA4I7375
4I-7375
4I7375
CA4I7375
4I-7375
4I7375
Weight: 10 pounds 4 kg.
EXCAVATOR,
You can buy:
US$520.00
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
4I7375 4I-7375 Core Radiator, Water Tank Fits 312B 311B 311 312
DLKULJMR Excavators || 4I7375 4I-7375 Core Radiator, Water Tank Fits 312B 311B 311 312
DLKULJMR Excavators || 4I7375 4I-7375 Core Radiator, Water Tank Fits 312B 311B 311 312
4I7375 4I-7375 Core Radiator, Water Tank Fits 312B 311B 311 312
EOPJPUBL Excavators || 4I7375 4I-7375 Core Radiator, Water Tank Fits 312B 311B 311 312
EOPJPUBL Excavators || 4I7375 4I-7375 Core Radiator, Water Tank Fits 312B 311B 311 312
Number on catalog scheme:
13
For full view, you need register
Information:
1. Remove bolts (1) and remove the oil pump pick-up and discharge tubes. 2. Remove two bolts (2) and remove the oil pump. The following step is for the installation of the oil pump.3. Position the oil pump and install and torque two bolts (2).4. Position the pick-up and discharge tubes and install bolts (1).End By:a. install oil panDisassemble And Assemble Oil Pump
Start By:a. remove oil pump 1. If necessary, remove the idler gear.2. Remove bolt (1) and remove relief valve spring (2) with relief valve (3).4. Use tooling (A) and remove input gear (4).
Before removing the input shaft and gear from the pump housing, be sure no burrs are on the input shaft. Burrs on the shaft may scratch and damage the pump housing.
5. Remove bolts (5) and separate the pump housing. Remove input shaft and gear (6) from the pump housing. Remove the driven gear from the housing. The following steps are for the assembly of the oil pump. Before pressing input gear (4) onto input shaft (6) be sure to install bolt (5), that is positioned under the input gear.6. Position input gear and shaft (6) in the pump housing. Press input gear (4) onto the input shaft until it is flush with the end of the shaft. Position the driven gear in the housing.7. Position the pump housings together. Install bolts (5). Install the idler gear if it was removed.8. Position relief valve spring (2), relief valve (3) and install bolt (1).End By:a. install oil pump
Start By:a. remove oil pump 1. If necessary, remove the idler gear.2. Remove bolt (1) and remove relief valve spring (2) with relief valve (3).4. Use tooling (A) and remove input gear (4).
Before removing the input shaft and gear from the pump housing, be sure no burrs are on the input shaft. Burrs on the shaft may scratch and damage the pump housing.
5. Remove bolts (5) and separate the pump housing. Remove input shaft and gear (6) from the pump housing. Remove the driven gear from the housing. The following steps are for the assembly of the oil pump. Before pressing input gear (4) onto input shaft (6) be sure to install bolt (5), that is positioned under the input gear.6. Position input gear and shaft (6) in the pump housing. Press input gear (4) onto the input shaft until it is flush with the end of the shaft. Position the driven gear in the housing.7. Position the pump housings together. Install bolts (5). Install the idler gear if it was removed.8. Position relief valve spring (2), relief valve (3) and install bolt (1).End By:a. install oil pump
Caterpillar parts catalog:
Parts shroud Caterpillar catalog:
0859387
SHROUD AS
307, E70B
307, E70B
1355749
SHROUD ASSEM.
311B, 312B
311B, 312B
1189951
SHROUD ASSEM.
311B, 312B
311B, 312B
8U0978
SHROUD
206, 212
206, 212
5W5711
SHROUD
206, 212
206, 212
8U4492
SHROUD
206, 212
206, 212
1705849
SHROUD AS
D6R, D6R II, D6R III, D6R STD, D6T, D7R II, D7R XR, D8R II
D6R, D6R II, D6R III, D6R STD, D6T, D7R II, D7R XR, D8R II
2526948
SHROUD AS
D6R II, D7R II
D6R II, D7R II
1456008
SHROUD AS
D6R, D7R
D6R, D7R
1389275
SHROUD AS
D6R, D7R
D6R, D7R
1481494
SHROUD AS
D6R, D7R
D6R, D7R