SIDE AS 4378838 - Caterpillar

The Electronic Control Module (ECM) detects the following conditions:
The throttle switch has not returned to the center position for 30 seconds.
The ECM has been powered for at least three seconds.System Response:The ECM will log the diagnostic code. The throttle switch will be ignored.Possible Performance Effect:
Reduced engine speedNote: If the engine is operating above 1000 rpm, the ECM will reduce the engine speed to 1000 rpm. If the engine is operating below 1000 rpm, the ECM will maintain the engine speed. The decelerator pedal modulates to 700 rpm.Troubleshooting:Test Step 1. Perform the following diagnostic procedure: "Throttle Switch Circuit - Test"Results:
OK - STOP