1955136 SIDECUTTER Caterpillar parts
330C L, 330D L, 336D L, 345B II, 345B L, 345D L, 350, 365C, 365C L, 374D L, 385C, 385C L
Rating:
Alternative (cross code) number:
CA1955136
195-5136
1955136
CA1955136
195-5136
1955136
Weight: 53 pounds 24 kg.
EXCAVATOR,
Compatible equipment models: 1955136:
Number on catalog scheme:
1
For full view, you need register
Information:
start by:a) remove compressor coil 1. Remove felt sleeve (1) from the compressor neck. 2. Use tool (A) to remove snap ring (2) from the compressor neck.3. Thoroughly clean the area inside the compressor neck. It is very important to keep all foreign material out of the compressor. DO NOT use air pressure. 4. Use tool (B) to remove seal seat (3) from the compressor neck. 5. Use tool (C) to remove the O-ring seal from the groove on the inside diameter of the compressor neck. 6. Push down and turn tool (D) to engage the ears of the tool with seal assembly (4). Remove the seal.7. Check the faces of the shaft seal. If the seal is damaged in any way, install a new seal.Install Compressor Shaft Seal
1. Check the area inside the compressor neck again to make sure it is clean.2. Put clean refrigerant oil on the shaft and the inside of the compressor neck. 3. Put clean refrigerant oil on the O-ring seal for the inside of the compressor neck. Use tool (A) to install the O-ring seal in the groove in the compressor neck. 4. Install seal protector (B) on the compressor shaft. 5. Put clean refrigerant oil on seal assembly (1).6. Use tool (C) to carefully install the seal assembly in the compressor neck.7. Remove tool (B) from the compressor shaft. 8. Put clean refrigerant oil on seal seat (2). Use tool (D) to install the seal seat. The seal must be installed deep enough to keep the O-ring seal in its groove in the compressor neck. 9. Use tool (E) to install snap ring (3). The flat surface of the ring must be toward the seal seat. 10. Install felt sleeve (4) in the compressor neck.end by:a) install compressor coil
1. Check the area inside the compressor neck again to make sure it is clean.2. Put clean refrigerant oil on the shaft and the inside of the compressor neck. 3. Put clean refrigerant oil on the O-ring seal for the inside of the compressor neck. Use tool (A) to install the O-ring seal in the groove in the compressor neck. 4. Install seal protector (B) on the compressor shaft. 5. Put clean refrigerant oil on seal assembly (1).6. Use tool (C) to carefully install the seal assembly in the compressor neck.7. Remove tool (B) from the compressor shaft. 8. Put clean refrigerant oil on seal seat (2). Use tool (D) to install the seal seat. The seal must be installed deep enough to keep the O-ring seal in its groove in the compressor neck. 9. Use tool (E) to install snap ring (3). The flat surface of the ring must be toward the seal seat. 10. Install felt sleeve (4) in the compressor neck.end by:a) install compressor coil
Caterpillar parts catalog:
Parts sidecutter Caterpillar catalog:
318C, 320B, 320C, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320E LN, 320E LRR, 321C, 321D LCR, 322C, 323D L, 323E L, 324D, 324D L, 324E, 324E L, 324E LN, 325, 325 L, 325B, 325B L, 325C, 325D, 325D L, ...
318C, 320B, 320C, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320E LN, 320E LRR, 321C, 321D LCR, 322C, 323D L, 323E L, 324D, 324D L, 324E, 324E L, 324E LN, 325, 325 L, 325B, 325B L, 325C, 325D, 325D L, ...
245, 245B, 330, 330 FM L, 330 L, 330B, 330B L, 330C L, 330D, 336D, 336E, 336E H, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 349E, 350, 365B L, 375, 375 L
245, 245B, 330, 330 FM L, 330 L, 330B, 330B L, 330C L, 330D, 336D, 336E, 336E H, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 349E, 350, 365B L, 375, 375 L
320C, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320E, 320E L, 320E LRR, 321D LCR, 322B L, 322C, 323D L, 323D2 L, 324D, 324D L, 324E, 324E L, 324E LN, 325B L, 325C, 325D, 325D L, 326D L, 329D, 3...
320C, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320E, 320E L, 320E LRR, 321D LCR, 322B L, 322C, 323D L, 323D2 L, 324D, 324D L, 324E, 324E L, 324E LN, 325B L, 325C, 325D, 325D L, 326D L, 329D, 3...
2383169
SIDECUTTER
365B L, 375 L, 385B, 385C L, 390D, 390D L
365B L, 375 L, 385B, 385C L, 390D, 390D L
2383170
SIDECUTTER
365B L, 375 L, 385B, 385C L, 390D, 390D L
365B L, 375 L, 385B, 385C L, 390D, 390D L
1122485
SIDECUTTER-RH
330B L, 345B II, 345B L, 350, 375 L
330B L, 345B II, 345B L, 350, 375 L
1122486
SIDECUTTER-LH
330B L, 345B II, 345B L, 350, 375 L
330B L, 345B II, 345B L, 350, 375 L
2755999
SIDECUTTER
330C L, 330D L, 336D L, 345B II, 345B L, 345D L, 350
330C L, 330D L, 336D L, 345B II, 345B L, 345D L, 350
330D L, 345C, 345D, 345D L, 349E L VG, 365B, 365B II, 365C, 374D L, 385B, 385C, 385C L, 390D, 390D L
1122486
SIDECUTTER-LH
330B L, 345B II, 345B L, 350, 375 L
330B L, 345B II, 345B L, 350, 375 L
1122485
SIDECUTTER-RH
330B L, 345B II, 345B L, 350, 375 L
330B L, 345B II, 345B L, 350, 375 L
2383170
SIDECUTTER
365B L, 375 L, 385B, 385C L, 390D, 390D L
365B L, 375 L, 385B, 385C L, 390D, 390D L
2383169
SIDECUTTER
365B L, 375 L, 385B, 385C L, 390D, 390D L
365B L, 375 L, 385B, 385C L, 390D, 390D L
3941192
SIDECUTTER
320D, 320D GC, 320E LN, 323D L, 323D2 L, 324E LN
320D, 320D GC, 320E LN, 323D L, 323D2 L, 324E LN
3941191
SIDECUTTER
320D, 320D GC, 320E LN, 323D L, 323D2 L, 324E LN
320D, 320D GC, 320E LN, 323D L, 323D2 L, 324E LN
330D L, 345C, 345D, 345D L, 349E L VG, 365B, 365B II, 365C, 374D L, 385B, 385C, 385C L, 390D, 390D L
330D L, 345C, 345D, 345D L, 349E L VG, 365B, 365B II, 365C, 374D L, 385B, 385C, 385C L, 390D, 390D L
1673837
SIDECUTTER-LH
330C L, 345B II, 345B L, 345C, 385B
330C L, 345B II, 345B L, 345C, 385B
1673836
SIDECUTTER-RH
330C L, 345B II, 345B L, 345C, 385B
330C L, 345B II, 345B L, 345C, 385B
2755999
SIDECUTTER
330C L, 330D L, 336D L, 345B II, 345B L, 345D L, 350
330C L, 330D L, 336D L, 345B II, 345B L, 345D L, 350
2755998
SIDECUTTER
330C L, 330D L, 336D L, 345B II, 345B L, 345D L, 350
330C L, 330D L, 336D L, 345B II, 345B L, 345D L, 350