4L7464 SILICON GREASE (4 cans) Caterpillar parts
7271, D353C, D379, D398, G379
Rating:
Alternative (cross code) number:
CA4L7464
4L-7464
4L7464
CA4L7464
4L-7464
4L7464
Weight: 13 pounds 5 kg.
GAS ENGINE, MARINE TRANSMISSION,
This part in 2 request:
Show.
This information for suppliers only!
2024-10-04
2020-03-25
Compatible equipment models: 4L7464:
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06182163
Remove clamps (1) and hoses (2).
Illustration 2 g06182171
Disconnect electrical connector (3).
Remove bolts (4). Remove solenoid valve (5).
Illustration 3 g06182178
Remove bolts (7). Remove solenoid valve (5) from bracket (6).
Repeat Steps 1 through 4 for the remaining solenoid valves.Installation Procedure
Install solenoid valve (5) in the reverse order of removal.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06182163
Remove clamps (1) and hoses (2).
Illustration 2 g06182171
Disconnect electrical connector (3).
Remove bolts (4). Remove solenoid valve (5).
Illustration 3 g06182178
Remove bolts (7). Remove solenoid valve (5) from bracket (6).
Repeat Steps 1 through 4 for the remaining solenoid valves.Installation Procedure
Install solenoid valve (5) in the reverse order of removal.