SLACK ADJUSTER GP 2050559 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8H-0663 Bearing Puller 1
5F-7345 Puller 1
126-7183 Crossblock 1
126-7177 Puller Leg 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01440573
Typical example
Remove circlip (9) from accessory drive housing (4).
Place accessory drive housing (4) onto a suitable support. Press the assembly of gear (7) and bearing (6) and bearing (8) out of accessory drive housing (4).
Use a Tooling (A) in order to remove bearing (6) and bearing (8) from gear (7).