SLEEVE AS 0395238 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
(A)     3S-6224     Electric Hydraulic Pump     1    
8T-0820 Pressure Gauge     1    
3B-7722 Bushing     2    
1P-2376 Coupler Assembly     2    
1P-2377 Plug     2    
8F-0024 Hose Assembly     2    
9U-6832 Fast Runner Nut Assembly     1    
4C-9634 Puller Stud     1    
5H-9817 Cylinder     1    
6V-2072 Receiving sleeve     1    
6V-4035 (1) Receiving sleeve     1    
9U-6227 (2) Bearing Puller Adapter     1    
9U-5337 (3) Bearing Puller Adapter     1    
( 1 ) This receiving sleeve may be used on some sticks for the bearing in the linkage pin bore.
( 2 ) The bearing puller adapter that is shown is for the bearing in the V-Family cylinder pin bore. 9U-6260 Bearing Puller Adapter is for the bearing in the W-Family cylinder pin bore.
( 3 ) The bearing puller adapter that is shown is for the bearing in the linkage pin bore on the V-Family linkage. 9U-5339 Bearing Puller Adapter is for the bearing in the linkage pin bore on the W-Family linkage.Start By:
Remove the bucket control linkage. Refer to Disassembly and Assembly, "Bucket Linkage - Remove" in this manual.
Illustration 1 g00604197
Remove lip type seal (1) .
Illustration 2 g00604199
Use Tooling (A) in order to remove the bearing from the pin bore.
Repeat Steps 1 and 2 in order to remove the seal and the bearing from the other side of the stick.
Illustration 3 g00604519
Remove two lip type seals (2) .
Illustration 4 g00604272
Use Tooling (A) in order to remove the bearing from the pin bore.
Repeat Steps 4 and 5 in order to remove the lip type seals and the bearing from the other side of the linkage assembly.
Illustration 5 g00605192
Remove lip type seal (3) from the linkage assembly.
Remove the bearing from the closed end of the linkage assembly with a chisel or by cutting.
Repeat Steps 7 and 8 in order to remove the lip type seal and the bearing from the other side of the linkage assembly.