1377178 SLEEVE-NYLON Caterpillar parts
45, 55
Rating:
Alternative (cross code) number:
CA1377178
137-7178
1377178
CA1377178
137-7178
1377178
Weight: 0.30 pounds 0 kg.
CHALLENGER,
Number on catalog scheme:
18
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0408 Shackle As 1 Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, and on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper draining procedure.
Illustration 1 g01259565
Disconnect hoses (4) .
Disconnect hose assembly (6) .
Disconnect hose (5) .
Disconnect hose (2) .
Remove slides (7) .
Remove bolts (1) .
Attach Tooling (A) and a suitable lifting device to radiator tank (3). Remove radiator tank (3). The weight of radiator tank (3) is approximately 25 kg (55 lb).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 189-0408 Shackle As 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 2 g01259565
Attach a suitable lifting device to radiator tank (3) and position radiator tank (3). The weight of radiator tank (3) is approximately 25 kg (55 lb).
Install bolts (1) .
Install slides (7) .
Connect hose (2) .Note: Ensure that hose (2) is not pinched during installation.
Connect hose (5) .
Connect hose assembly (6) .
Connect hoses (4) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System (ELC) Coolant - Change" for the correct procedure. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the cooling system.End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0408 Shackle As 1 Start By:
Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, and on all hose assemblies for installation purposes. Plug all hose assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper draining procedure.
Illustration 1 g01259565
Disconnect hoses (4) .
Disconnect hose assembly (6) .
Disconnect hose (5) .
Disconnect hose (2) .
Remove slides (7) .
Remove bolts (1) .
Attach Tooling (A) and a suitable lifting device to radiator tank (3). Remove radiator tank (3). The weight of radiator tank (3) is approximately 25 kg (55 lb).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 189-0408 Shackle As 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 2 g01259565
Attach a suitable lifting device to radiator tank (3) and position radiator tank (3). The weight of radiator tank (3) is approximately 25 kg (55 lb).
Install bolts (1) .
Install slides (7) .
Connect hose (2) .Note: Ensure that hose (2) is not pinched during installation.
Connect hose (5) .
Connect hose assembly (6) .
Connect hoses (4) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System (ELC) Coolant - Change" for the correct procedure. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the cooling system.End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Caterpillar parts catalog:
Parts sleeve Caterpillar catalog:
1284106
SLEEVE-NYLON
35, 45, 55
35, 45, 55
1739993
SLEEVE
35, 45, 55
35, 45, 55
1121497
SLEEVE-PINION
35, 45, 55
35, 45, 55
45, 55, 65, 65C, 75C, 75D, 85C, 85D
1176875
SLEEVE-ADJUSTMENT
35, 45, 55
35, 45, 55
1145727
SLEEVE-BORE
35, 45, 55
35, 45, 55
3176, 3176B, 75C, 85C
140H, 143H, 14H, 14M, 160H, 163H, 16H, 16M, 3176, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L ...
12H, 12M 2, 12M 3, 12M 3 AWD, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16H, 16M, 2290, 2390, 2391, 2491, 2590, 2864C, 3176, 3176B, 3176C, 3...
140H, 143H, 14H, 160H, 163H, 16H, 3176, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 480, 572R II, 65E, 725, 730, 75, 75C, 75D, 75E, 814F, 815F, 816F, 85C, 85D, 85E, 9...
1128750
SLEEVE
35, 45, 55
35, 45, 55
1128749
SLEEVE
35, 45, 55
35, 45, 55