SLEEVE-BEARING 3694653 - Caterpillar

Table 1.
Illustration 1. 365B Excavator Hydraulic Tank
(1) 143-7966 Indicator
(2) 143-8037 Indicator (Left Side)
(3) 143-8037 Indicator (Right Side)
(A) Single hydraulic filter group
(B) Multiple hydraulic filter group
Illustration 2. 385B Excavator Hydraulic Tank
(1) 143-7966 Indicator
(2) 143-8037 Indicator (Left Side)
(3) 143-8037 Indicator (Right Side)
(A) Single hydraulic filter group
(B) Multiple hydraulic filter group
Illustration 3. 143-7966 Indicator
Disassemble the wiring harness connector from the 143-7966 Indicator for the single hydraulic filter group or from the 143-8037 Indicator for the multiple hydraulic filter group.
Loosen the four 8T-0829 Bolts and remove the case and the seal.
Loosen the four 8T-4127 Screws and remove the indicator.
Installation Of The 274-2484 Indicator Repair Kit
Reqired Parts
Qty Part Number Description Note
1 274-2484 Indicator Repair Kit
2 242-6883(1) Gasket
2 242-6882(1) Cover
8 8T-0328(1) Hard Washer
8 6V-4298(1) Bolt
1 267-7960(1)(2) Wire Assembly 3 Pin Connector
1 267-8048(1)(2) Wire Assembly 4 Pin Connector
Table 2.
(1)Component In The 274-2484 Indicator Repair Kit
(2)Nonserviceable Item
Install the 242-6883 Gasket and the 242-6882 Cover. Use the 6V-4298 Bolts and 8T-0328 Washers.
Illustration 4
(4) 267-7960 Wire Assembly
(5) 267-8048 Wire Assembly
(C) 3 Pin connector
(D) 4 Pin connector
Connect the 267-7960 Wire Assembly with the connector (3 Pin) on the vehicle wiring harness for the 143-7966 Indicator. Refer to Illustration 4.
Connect the 267-8048 Wire Assembly with the connector (4 Pin) on the vehicle wiring harness for the 143-8037 Indicator. Refer to Illustration 4.
COPYRIGHT 2005 CATERPILLAR
ALL RIGHTS RESERVED