SLEEVE 3830309 - Caterpillar

Standard Control Panel
Illustration 1 g00948388
Standard control panel (1) Run/stop switch (2) "ALARM" light (3) Start switch (4) "RUN" lightDeluxe Control Panel
Illustration 2 g00948154
Deluxe control panel (1) "ALARM" light (2) Oil pressure gauge (3) Coolant temperature gauge (4) Voltmeter gauge (5) Hour meter (6) "RUN" light (7) Start switch (8) Run/stop switchStarting the Genset Above -5 °C (23 °F)
Depress the "ON" toggle switch.Note: The "ALARM" lamp will illuminate confirming that the "ALARM" lamp is operational.
Depress the "START" toggle switch. The engine will crank and the engine will start.After the engine starts, the "RUN" light will be illuminated and the "ALARM" should turn off. The "ALARM" lamp will illuminate and the engine will shut down if one of the following faults is detected:
low engine oil pressure
high engine coolant temperature
high exhaust temperature on engines with a water cooled exhaust manifoldFind the source of the problem and correct the problem before you attempt to restart the engine.Starting the Genset Below -5 °C (23 °F)
Depress the "ON" toggle switch.Note: The "ALARM" lamp will illuminate confirming that the "ALARM" lamp is operational.
Depress the "HEAT" toggle switch for 15 seconds.
Depress the "START" toggle switch. The engine will crank and the engine will start.After the engine starts, the "RUN" light will be illuminated and the "ALARM" should turn off. The "ALARM" lamp will illuminate and the engine will shut down if one of the following faults is detected:
low engine oil pressure
high engine coolant temperature
high exhaust temperature on engines with a water cooled exhaust manifoldFind the source of the problem and correct the problem before you attempt to restart the engine.Stopping the Genset
Depress the "STOP" toggle switch in order to stop the genset.