SLEEVE 3T0810 - Caterpillar

Illustration 1 g01087914
The 243-3130 Contamination Monitor Gp allows the technician to monitor the cleanliness of hydraulic fluid or lubrication oil in systems with a maximum pressure of 689 kPa (100 psi). The contamination monitor group is ideal for use with filter carts. The contamination monitor group can pump a sample of oil from nonpressurized systems or from S O S bottles for quick checks of the sample.This contamination monitor group provides only ISO cleanliness codes, but this contamination monitor group is a lower cost unit than traditional particle counting equipment. The ISO cleanliness codes can be displayed in 6 micron or 14 micron particle sizes. If the contamination monitor group is connected to a computer, 4 micron particle sizes can also be displayed.The contamination monitor group must be used with the 6V-4144 Coupler, the 243-3133 Quick Connect Coupler (Fluid Sampling), or the 210-5530 Coupler .The contamination monitor group includes the following equipment: a monitor assembly, a DC power supply, an AC power supply, a communication cable, a software disk, a user's manual and a carrying case. Refer to the Tool Operating Manual, NEHS0908 for more information.
Table 1
Specifications for the 243-3130 Contamination Monitor Gp    
Maximum Pressure    
689 kPa (100 psi)    
Display     3 digit, ISO cleanliness code (examples: 18/15, 16/13)    
Monitor     3 channel with integrated piston pump for use on low pressure systems or on nonpressurized systems    
Power     requires 12 to 30 volts DC    
AC adapter     input 110 to 250 volts AC/ output 24 volts DC, 80 watts    
Communications     requires DB9 connector    
Calibration     ISO-11171    
Overall size     299 X 203 X 172 mm (11.75 X 8.0 X 6.75 inch)    
Table 2
Service Parts for 243-3130 Contamination Monitor Gp    
Pt. No.     Description    
243-3131     Power Cable (with Alligator Clips)    
243-3132     Power Supply (AC Adapter)    
243-3144     Communication Cable As (RS232)    
188-0639     Hose As (Low Pressure)    Repair InformationThe unit is warranted by the manufacturer for one year from date of receipt. If a unit in North or South America needs servicing, contact the manufacturer's repair facility:PAMAS-USA6721 E. 106th St.
Tulsa, OK 74133 U.S.A.
Phone: 918-299-4019Fax: 918-299-7410If a unit in Europe or in Asia needs servicing, contact the manufacturer's repair facility:PAMAS-GmBHDieselstrasse 10
D-71277 Rutesheim
Postfach 1162
Germany
orSintech Scientific (SEA) Pet Ltd.No. 196 Pandan Loop #02-18
Pantech Industrial Complex
Singapore 128384