SLEEVE 3T0919 - Caterpillar

Replace the two former tilt cylinders with two new 206-2000 Cylinder Assemblies. Remove the adapters from the old cylinder. Install the adapters into the new cylinders with the new 6V-0405 Seals .Reference: Refer to Disassembly and Assembly, RENR3007, "Tilt Cylinder - Remove" for HH45 S/N:2JZ
, HH55 S/N:3MZ
, and HH65 S/N:4RZ
machines for more information.Reference: Refer to Disassembly and Assembly, RENR4358, "Tilt Cylinder - Remove" for HH45 S/N:CFE
, HH55 S/N:CFS
, and HH65 S/N:CKJ
machines for more information.
Test the pressures on the tilt cylinders for the correct setting. Test the tilt function for the correct speed.Reference: Refer to Testing and Adjusting, RENR3005, "Tilt Cylinder Pressure - Test and Adjust" for HH45 S/N:2JZ
, HH55 S/N:3MZ
, and HH65 S/N:4RZ
machines for more information.Reference: Refer to Testing and Adjusting, RENR4355, "Tilt Cylinder Pressure - Test and Adjust" for HH45 S/N:CFE
, HH55 S/N:CFS
, and HH65 S/N:CKJ
machines for more information.Delimbing Knife Cylinders
The new delimbing knife cylinders are available for all Harvester Heads and all three Wheel Harvesters.
Table 4
Part Number of the New Delimbing Knife Cylinders    
HH45     209-5725    
HH455, HH65, and HH75     206-2001    
Replace the delimbing knife cylinder with the new cylinder assemblies.
Remove the adapters from the old delimbing knife cylinders. Install the adapters into the new delimbing knife cylinders.
Test the delimbing knife cylinder for the correct pressure setting. Test the delimbing knife for the correct speed.Reference: Refer to Disassembly and Assembly, RENR3007, "Delimbing Knife Cylinder - Remove" for HH45 S/N:2JZ
, HH55 S/N:3MZ
, HH65 S/N:4RZ
, and HH75 S/N:5WZ
machines for more information.Reference: Refer to Disassembly and Assembly, RENR4358, "Delimbing Knife Cylinder - Remove" for HH45 S/N:CFE
, HH55 S/N:CFS
, HH65 S/N:CKJ
, and HH75 S/N:CKW
machines for more information.Reference: Refer to Testing and Adjusting, RENR3005, "Delimbing Knife Pressure (Wheel Harvester) - Test and Adjust" for HH45 S/N:2JZ
, HH55 S/N:3MZ
, and HH65 S/N:4RZ
machines for more information.Reference: Refer to Testing and Adjusting, RENR4355, "Delimbing Knife Pressure (Wheel Harvester) - Test and Adjust" for HH45 S/N:CFE
, HH55 S/N:CFS
, and HH65 S/N:CKJ
machines for more information.Saw Cylinder and Measuring Arm Cylinder
The new measuring arm cylinder and the new saw cylinders are available for all four Harvester Heads and all three Wheel Harvesters.
Table 5
Parts List for the New Cylinders    
Cylinder     Part Number    
Saw Cylinder     206-2003    
Measuring Arm Cylinder     206-4594    
Replace the saw cylinder with the new saw cylinder. Replace the measuring arm cylinder with the new measuring arm cylinder.
Remove the adapters from the old cylinders. Install the adapters into the new cylinder assemblies.
Test the measuring arm cylinder for the correct pressure setting. Test the speed of the measuring arm. Test the speed of the saw cylinder.Reference: Refer to Disassembly and Assembly, RENR3007, "Saw Cylinder - Remove" and Disassembly and Assembly, RENR3007, "Measuring Arm Cylinder - Remove" for HH45 S/N:2JZ
, HH55 S/N:3MZ
, HH65 S/N:4RZ
, and HH75 S/N:5WZ
machines for more information.Reference: Refer to Disassembly and Assembly, RENR4358, "Saw Cylinder - Remove" and Disassembly and Assembly, RENR4358, "Measuring Arm Cylinder - Remove" for HH45 S/N:CFE
, HH55 S/N:CFS
, HH65 S/N:CKJ
, and HH75 S/N:CKW
machines for more information.Reference: Refer to Testing and Adjusting,