SLEEVE-YM 5222289 - Caterpillar

1. Remove two screws (2) and remove lens assembly (4).2. Remove heater and air conditioning temperature control knobs (3). Remove four bolts (1) and lower the panel assembly. 3. Disconnect two wires (5) from the light assembly. Remove three screws (6) and nuts. Remove the light assembly.Install Cab Light Assembly
1. Connect two wires (1) to light assembly (3). Put the light assembly in position on panel (2). Install the three screws which fasten the light assembly to the panel. 2. Install panel (2) on duct with four bolts (4). Install heater and air conditioning control knobs (5).3. Install lens assembly (6) on the light assembly with two screws.