SLEEVE 5382124 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     FT-1114     Vacuum Cap     1    
5P-0306 Vacuum Transducer     1    
6V-4142 Fitting     1    
5K-5068 Fitting     1    
B     6V-3009     Crossbar     1    
6V-4832 Forcing Screw     1    
4B-5271 Washer     2    
8T-9085 Bolt     2    Start By:
Release the hydraulic system pressure.Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes.
Illustration 1 g01105562
Remove the hydraulic tank cap and install Tooling (A). Apply 276 kPa (40 psi) to 414 kPa (60 psi) of air pressure to Tooling (A) .
Illustration 2 g01108011
Remove bolts (1). Open doors (2) .
Illustration 3 g02239916
Reposition hose assemblies (3) .
Remove hose assemblies (4) and repostion hose assemblies (5) .
Illustration 4 g01385866
Attach a suitable lifting device to fan spider (6). Remove bolts (7) in order to position fan spider (6) away from piston motor (8). The weight of fan spider (6) is approximately 34.0192 kg (75 lb).
Illustration 5 g01385871
Attach a suitable lifting device to piston motor assembly (8). Remove bolts (9) and remove piston motor assembly (8). The weight of piston motor assembly (8) is approximately 29 kg (65 lb).
Illustration 6 g01385872
Remove bolt (10). Use Tooling (B) in order to remove adapter (11). Remove bolts (12) and plate (13) from piston motor (8) .Installation Procedure
Install piston motor (8) in the reverse order of the removal procedure.