SLEEVE 6I1326 - Caterpillar

Illustration 15 g06066540
Remove nuts (32) and disconnect hose assemblies (34). Remove bolt (33) and the clip.
Illustration 16 g06066544
Cut cable straps (35) and disconnect harness assemblies (36) and (37).
Illustration 17 g06066554
Remove bolt (38) and the clamp.
Illustration 18 g06066559
Disconnect hose assemblies (39) and (40). Loosen clamp (41).
Illustration 19 g06066562
Remove nut (42) and clamp (43). Remove tube (44).
Illustration 20 g06066567
Remove nut (45) and ground strap (46).
Illustration 21 g06066585
Remove bolt (47) and reposition clamp (48) out of the way.
Illustration 22 g06066608
Loosen clamp (49). Disconnect hoses (50) and (51).
Illustration 23 g06066938
Remove bolt (52) and clip (53).
Illustration 24 g06066940
Disconnect hose (55) and remove tube (54).
Illustration 25 g06066942
Disconnect hose assemblies (56). Remove bolts (57) and reposition the clips.
Illustration 26 g06066947
Remove bolt (58) and disconnect harness assemblies (59) and (60).
Illustration 27 g06066951
Remove bolt (61) and reposition hose assemblies (62) and (63) out of the way.
Illustration 28 g06066955
Typical Example
Illustration 29 g06066960
Attach Tooling (B), Tooling (C), and a suitable lifting device to engine and transmission (64). The weight of engine and transmission (64) is approximately 2585 kg (5700 lb).
Remove mounting bolts (65) and engine and transmission (64).Installation Procedure
Install engine and transmission (64) in the reverse order of removal.
Tighten nut (45) to a torque of 26 4 N m (230 35 lb in).
Tighten nuts (32) to a torque of 21 3 N m (186 27 lb in).
Tighten bolt (30) to a torque of 4.4 1 N m (39 9 lb in).
Tighten bolt (29) to a torque of 6.2 0.6 N m (55 5 lb in).