SLEEVE 7S4539 - Caterpillar

Illustration 1 g02145590
(A) Outer diameter of piston over three lands ... 89 0.03 mm (3.5 0.001 inch) (B) Bore of cylinder assembly ... 90 mm (3.5 inch) (C) Outer diameter of rod ... 50 mm (1.96 inch) (D) Bore of head over four lands ... 50.33 0.03 mm (1.98 0.001 inch) (1) Apply Loctite 271 to the bottom of the 212-0907 Connector Plate prior to assembly. (2) 242-9514 Carrier Apply Loctite 242 to the threads prior to assembly. Torque for carrier for the magnet ... 35 5 N m (26 4 lb ft) (3) Lubricate the head with clean grease. Torque for head ... 600 130 N m (440 95 lb ft)Note: Apply Loctite 609 to the groove for the wiper seal prior to assembly. (4) Lubricate the sealing lips lightly with the lubricant that is being sealed. (5) Lubricate threads. Torque for piston ... 1375 137 N m (1014 101 lb ft) (6) Apply Loctite 242 to the threads prior to assembly. Torque for one setscrew ... 25 6 N m (18.4 4.4 lb ft) (7) Torque for one setscrew ... 25 6 N m (18.4 4.4 lb ft) (8) Torque for three plugs ... 140 14 N m (103.3 10.3 lb ft) (9) Torque for two bolts ... 47 9 N m (34.7 6.6 lb ft)Position Sensor Group
Illustration 2 g02145588
(10) 328-6117 Position Sensor Gp Supply voltage ... 10 + 1 − 3 VDC Operating temperature ... −40 to 120 °C (−40 to 248 °F)