SLEEVE 7T3192 - Caterpillar

Never bend the eyebolts and the brackets. Only load the eyebolts and the brackets under tension. Remember that the capacity of an eyebolt is less as the angle between the supporting members and the object becomes less than 90 degrees.When it is necessary to remove a component at an angle, only use a link bracket that is properly rated for the weight.
Use a hoist to remove heavy components. Use an adjustable lifting beam to lift the entire package. Use an adjustable lifting beam to lift the engine. All supporting members (chains and cables) should be parallel to each other. The chains and cables should be perpendicular to the top of the object that is being lifted.Some removals require lifting fixtures in order to obtain proper balance. Lifting fixtures also help to provide safety.Lifting eyes are designed and installed for each package. Alterations to the lifting eyes and/or the package make the lifting eyes and the lifting fixtures obsolete. If alterations are made, ensure that proper lifting devices are provided. Consult your Cat dealer for information regarding fixtures for proper lifting.
Illustration 1 g02726432
Lifting eyes for the generator set
(1) Lifting eyes for the engine
(2) Lifting eye for the generator
(3) Lifting eyes for the generator set Lifting the Entire Package
Do NOT use the engine lifting eyes or the generator lifting eyes to lift the entire package. Lifting points (3) have been provided on the base rails of the generator set for lifting the entire package. However, lifting the engine and the generator together requires special equipment and procedures. The use of a spreader bar and 4-point lifting is required. Care must be taken to ensure that the enclosure is not crushed. The enclosure package must be lifted separately with factory supplied fuel tanks. Consult your Cat dealer for information regarding fixtures for proper lifting of your complete package.Living the Engine Only
To remove the engine ONLY, use lifting eyes (2) that are on the engine.
Illustration 2 g02726433
Lifting eyes for the engine
Some components removed for visibility
Lifting the Generator
Note: The control panel and the terminal will need to be removed before attempting to lift the generator.To remove the generator ONLY, use lifting eyes (1) that are on the generator.