SLEEVE 8P1097 - Caterpillar

Illustration 7 g06175647
(2) 113-0919 Bolt
(3) 096-6166 Hard Washer
Install eight bolts (2) with eight washers (3) for engine harness clip assemblies.
Illustration 8 g06175662
(4) 096-6166 Hard Washer
(5) 5C-8312 Nut
Install eight washers (4) and eight nuts (5) onto bolts (2).Harness Support Installation for the 16 Cylinder Engine
Illustration 9 g06175436
(1) 454-8518 Bracket
Install bracket (1) on the front of the engine.
Illustration 10 g06175428
(2) 417-2931 Bracket
Install bracket (2) on the front side of the engine.
Illustration 11 g06217687
Typical Harness Routing Across Front Housing for the 16 cylinder engine
Install engine harness assembly .
Illustration 12 g06249680
16 cylinder engine
(3) 5P-7469 Clip
(4) 5P-7468 Clip
(5) 8T-1889 Clip
(6) 8T-1890 Clip
(7) 2G-6297 Plate
(14) 6V-0545 Grommet
(15) 6V-0826 Grommet
Install plate (7).
Install grommets (14) with clips (3) and (4).Install grommets (15) with clips (5) and (6).
Illustration 13 g06217694
16 cylinder engine
(7) 2G-6297 Plate
(8) 9C-5344 Spacer
(9) 6V-4249 Bolt
(10) 6V-5839 Washer
(11) 6V-3822 Bolt
(12) 2Y-5829 Nut
(13) 6V-1820 Bolt
At two locations, install spacer (8), using a bolt (9) and washer (10).
At three locations, install a bolt (13) and washer (10) to a nut (12) and washer (10), at three locations.
At three locations, install a bolt (11) and washer (10) to a nut (12) and washer (10).Overmold Connection Installation
Illustration 14 g06175630
(1) 507-8846 Clip As
Install two clip assemblies (1) to engine harness.
Illustration 15 g06175647
(2) 113-0919 Bolt
(3) 096-6166 Hard Washer
Install eight bolts (2) with eight washers (3) for engine harness clip assemblies.
Illustration 16 g06175662
(4) 096-6166 Hard Washer
(5) 5C-8312 Nut
Install eight washers (4) and eight nuts (5) onto bolts (2).