parts catalog

SLIDER A 0877316 - Caterpillar

0877316 SLIDER A Caterpillar parts SLIDER
Alternative (cross code) number:
Caterpillar 0877316 SLIDER A

Buy SLIDER A 0877316 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Feeder Control Paddle
Illustration 1 g06268454There are two feeder control paddles. There is one paddle on each side of the machine. The feeder control paddles provide feedback to the electronic control module. The mix height control provides the operational input of the height of material that is desired.The feeder control paddles should be mounted within 1 ft of the auger. The angle of the feeder control paddle determines the speed of the drag conveyor and the auger conveyor. The operating range of the feeder control paddle is zero degrees to 45 degrees. Adjust the length of the paddle to gain additional material height. Decrease the length of the paddle to increase the material height.Sonic Sensor
Illustration 2 g01730213The sonic sensors for the auger can be adjusted to different positions in relation to the machine side plate and the screed end gate. Install the sonic sensor for the auger (1) and use mounting hardware (2) to position the sonic sensor for the auger. Adjust the sensor to prevent material from contacting the sensor. Adjust the sensor to prevent contact with the machine side plate during operation.

Parts slider Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.