SLIDER 3214252 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     2    
Illustration 1 g02195233
Illustration 2 g02195333
Use Tooling (A) and a suitable lifting device in order to install pump drive (6). The weight of pump drive (6) is approximately 318 kg (700 lb).
Install mounts (10), plate (9), washers (8), nuts (11), and bolt (7). Tighten bolt (7) to a torque of 475 50 N m (350 37 lb ft). Repeat this step for the remaining mounts.
Illustration 3 g02195073
Do not step on the tubes attached to the pump drive
Connect hose assembly (5) .
Illustration 4 g02194638
Install tube assembly (4) .
Illustration 5 g02195133
Position pump drive shaft (2) and install bolts (3). The weight of pump drive shaft (2) is approximately 54 kg (120 lb). Tighten bolts (3) to a torque of 300 30 N m (221 22 lb ft).
Illustration 6 g02193638
Connect hose assembly (1) .End By:
Install the gear pump for the pilot system and the hydraulic oil cooler. Refer to Disassembly and Assembly, "Gear Pump (Pilot System, Hydraulic Oil Cooler) - Install".
Install the fixed displacement implement pumps. Refer to Disassembly and Assembly, "Piston Pump (Implement, Fixed Displacement) - Install".
Install the fixed and variable displacement implement pump. Refer to Disassembly and Assembly, "Piston Pump (Implement)(Fixed, Variable Displacement) - Install".