SLING-NYLON 1U8254 - Caterpillar

Removal Procedure
Start By:
Remove the right side engine enclosure.
Illustration 1 g06016632
Remove belt (1). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace" to remove and install the belt.
Illustration 2 g06016647
Disconnect cable assembly (3), harness assembly (4), and cable assembly (5).
Remove bolts (2) and alternator (6).Installation Procedure
Install alternator (6) in the reverse order of removal.
Tighten bolts (2) to a torque of 50 N m (37 lb ft).
Tighten the nut for cable assembly (5) to a torque of 6 N m (53 lb in).
Tighten the nut for harness assembly (4) to a torque of 4 N m (35 lb in).
Tighten the nut for cable assembly (3) to a torque of 12 N m (106 lb in).