SLING-NYLON 1U8255 - Caterpillar

Rework Procedure
Table 1
Parts List
Item QTY Part Number Part Name
1 1 486-1449 Bracket
Illustration 1 g06143161
(1) 486-1449 Bracket
(A) 796 1.5 mm (31.34 0.06 inch)
(B) 107.3 1.5 mm (4.22 0.06 inch)The 486-1449 Bracket (1), fitted to the 237-7765 Door As, improves door retention.Use the following rework procedure to update the adaptable machines that are listed above with the 486-1449 Bracket.Refer to Illustration 1 for assembly details.Refer to Special Instruction , REHS1841, "General Welding Procedures" for information on all welding procedures.
Illustration 2 g06143159An alternative procedure for attaching the bracket is to use 2, 6 mm (0.24 inch) bolts, washers, and nuts as shown in Illustration 2.
Illustration 3 g06143426
Bracket fabrication
(A) 38 mm (1.5 inch)
(B) 121 mm (4.76 inch)
(C) 111 mm (4.37 inch)
(D) 15.6 mm (0.61 inch)
(E) 3.6 mm (0.14 inch)
(F) 71 mm (2.80 inch)
(G) 88 mm (3.47 inch)
(H) 45 Degree angleAn alternative source for obtaining the bracket is to fabricate the bracket from 6 mm (0.24 inch) bar stock as shown in Illustration 3.