SLIP JOINT GP 1725232 - Caterpillar

Illustration 1 g02981576
Right side view
Table 1
Specification for 345-9009 Turbocharger Gp
Item Qty Part Specification Description
1 4 375-2467 Flange Locknut Before assembly, lubricate the threads and bearing surfaces with Loctite C5A Copper Anti-Seize.
Torque to 70 5 N m (52 4 lb ft).
2 1 239-5858 Compressor Clamp Assembly Tighten the compressor clamp assembly to 13.6 1.2 N m (120.4 10.6 lb in).
3 1 9N-2038 Turbine Clamp As Use the following procedure in order to tighten the turbine clamp assembly:
1. Tighten to 18.0 1.6 N m (159.3 14.2 lb in).
2. Loosen by 1 to 2 turns.
3.Again, tighten to 13.6 1.2 N m (120.4 10.6 lb in).