SLIP JOINT GP 2828211 - Caterpillar

Illustration 1 g01948830
Park the machine on level ground. Lower the bucket to the ground with the stick in a vertical position.
Illustration 2 g01147858
(1) Bolts (2) Washers (3) Cover
Remove bolts (1) , washers (2) and access cover (3) from the top of the hydraulic tank.
Illustration 3 g00741014
Clean the area thoroughly in order to keep dirt out of the return filter cover and the pressure cap.
Relieve the internal pressure from the hydraulic tank by loosening the pressure cap. After the pressure is relieved, remove the pressure cap.
Illustration 4 g01147916
(4) Cover (5) Bolts (6) Washers (7) Valve (8) Spring (9) Element (10) O-ring seal
Remove bolts (5) , washers (6) and access cover (4) .
Remove spring (8) , valve (7) and element (9) from the tank.
Inspect O-ring seal (10) . Replace the O-ring seal if wear or damage is evident.
Install a new element (9) into the tank. Install valve (7) and spring (8) onto the tank also.
Install access cover (4) , washers (6) , and bolts (5) .
Clean the pressure cap and install the pressure cap.
Install access cover (3) with bolts (1) and washers (2) .