SLIP JOINT GP 5457172 - Caterpillar

Illustration 1 g03506083
Table 1
Specification for 228-3238 Piston Motor Gp
Item Qty Part Specification Description
1 1 5P-7684 Plug Torque to 430 40 N m (317 30 lb ft).
2 - - Lubricate sliding surfaces lightly with hydraulic oil.
3 20 124-1561 Brake Spring Length under test force is 19.0 mm (0.75 inch).
Test force is 425 43 N (96 10 lb).
Free length after test is 22.06 mm (0.869 inch).
4 2 9S-4185 O-Ring Plug Torque to 82 8 N m (60 6 lb ft).
5 2 9S-4183 Plug Torque to 190 20 N m (140 15 lb ft).
6 6 8T-4187 Bolt Torque to 530 70 N m (391 52 lb ft).
7 1 6V-3382 Lip Type Seal Before assembly, apply blue Loctite 242 to the outer diameter of seal cup.
8 1 118-5805 Special Race Bearing Assemble the bearing with the snap ring of the bearing toward the shaft flange.
9 2 1T-0936 Pipe Plug The plug must be flush with the head surface or below the head surface.
10 1 124-1554 Spring Length under test force is 15 mm (0.6 inch).
Test force is 15.0 2.0 N (3.4 0.4 lb).
Free length after test is 16.15 mm (0.636 inch).
11 1 087-4786 Adapter Torque to 115 10 N m (85 7 lb ft).
D - - Distance between the head and the port interface is 20.13 0.20 mm (0.793 0.008 inch).
12 1 230-5483 Spring Length under test force is 25 mm (1.0 inch).
Test force is 60 8 N (13 2 lb).
Free length after test is 35 mm (1.4 inch).
13 1 195-4456 Orifice Plug Torque to 7 1 N m (62 9 lb in).