SOCKET-IMPACT 1240662 - Caterpillar

Tools To Test And Charge Air Conditioning Systems
These tool part numbers are in Chart (A). The 5P8579 Air Conditioning Test and Charging Group has all the fittings, hoses, and testers necessary to make a diagnosis of the system. All the components fit in a box for storage. See illustration 1. The three hoses in the group are 8 ft (2440 mm) long, about 1 ft (305 mm) longer than other test hoses for this use. The group has a thermometer and a 5P8585 Electronic Leak Detector which is more accurate than the flame tester.
Illustration 1. 5P8579 Test and Charging Group in its compact box.
Illustration 2. The charging cylinder to fill the system.
Illustration 3. The vacuum pump to remove the gas.Special Instruction SMHS7218 comes with the tool group and tells you how to calibrate (adjust) the electronic detector and the 5P8574 Thermometer.
The charging cylinder and vacuum pump are available for 110V or 220V power supply, so the correct one must be ordered for the voltage in your area. See illustrations 2 and 3. Special Instruction SMHS7229 comes with either charging cylinder and SMHS7228 comes with either vacuum pump. Be sure to follow the operation and maintenance instructions in both Special Instructions.
Service Tool Announcement, SENS6186 dated 6/77, lists all the part numbers of the components in the 5P8579 Group. Also, details on how to use these tools are in Service Manual Modules SENR7140 for motor graders, SENR7199 for track-type tractors, and in service training video tapes.
Tools For Disassembly Of Frigidaire Compressors
A complete set of tools is available to use on Frigidaire Freon compressors on Caterpillar machines. With these tools, you can remove and install the seals, clutch pulley, and pulley bearing. See illustrations 4 and 5.
The compressor tool part numbers are in Chart (B) that follows. The 5P7424 Tool Group has several components, all with Caterpillar part numbers, and are shown in Tool Announcement, SENS6185 dated 7/77. The use of the tools is shown in the Service Manual Modules SENR7140 for motor graders and SENR7199 for track-type tractors. The tool group comes in the box shown in Illustration 4.
Illustration 4. Tool group to make repairs on Frigidaire compressors.
Illustration 5. The fixture for work on Frigidaire compressors.