SOCKET 1457385 - Caterpillar

Features/Benefits
* Used to disassemble and assemble transmission1U-9089 Clutch Spring Compressor:
* Used to compress clutch springs (Belleville washers) to remove retaining ring during transmission removal and assembly * Used with hydraulic press to compress the springs* Designed to easily access retaining ring when compressor is in place1U-9090 Bearing And Gear Puller:
* Used to remove various press fit bearings and gears from shaft* Requires two 5/8-18 threaded forcing screws (use 8B-7552 Forcing Screw or equivalent)1U-9091 Guide Stud;
* Used to guide rear and center housings during removal and installation (two required) * Installs into threaded holes in front housing* Also helps align gaskets during installation procedure1U-9092 Wear Sleeve Remover:
* Used to remove gear shaft bore sleeves (114-5726 and 114-5727) from center housing* Used with slide hammer* Insert remover into bore sleeve and expand it by turning hex portion of remover (pins of expander fit into oil holes of bore sleeve)1U-9287 Plate Group:
* Used to lift gear, shaft, and clutch pack during transmission overhaul* Removes and installs THIRD and FOURTH stage speed clutches in front housing (removes both speed clutches at the same time) * Removes and installs SECOND stage speed clutch (use only one hole in plate group) * Used with 1P-7407 Eye Bolt or equivalent and secured in place with a nut * Designed to fit over shaft - top portion of plate group then rotates into groove in shaft for a positive lock
Tools Used to Disassemble and Assemble Transmissions (1) 1U-9089 Clutch Spring Compressor. (2) 1U-9287 Plate Group. (3) 1U-9092 Wear Sleeve Remover. (4) 1U-9090 Bearing and Gear Puller. (5) 1U-9091 Guide Stud [two required].