AVSPARE.COM
parts catalog

SOCKET 1P7424 - Caterpillar


1P7424 SOCKET Caterpillar parts
Rating:
11
Alternative (cross code) number:
CA1P7424
1P-7424
1P7424
Caterpillar 1P7424 SOCKET
Weight: 34 pounds 15 kg.

Buy SOCKET 1P7424 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 8 g00938959
Disconnect hose assemblies (20).
Illustration 9 g00938961
Install Tooling (A) to stub boom (3) and fore boom cylinder (21), as shown.
Illustration 10 g01318172
Raise stub boom (3) to a vertical position, as shown. Keep slight lifting tension on stub boom (3). Lower fore boom cylinder (21) onto Tooling (F).
Illustration 11 g00938996
Open door (22) and detach lift cylinders (23).
Illustration 12 g00938999
Use Tooling (B) and support door (22), as shown.
Illustration 13 g00939009
Attach a suitable lifting device to fore boom cylinder (21), as shown. Note: Mark shims for installation purposes.
Illustration 14 g00939419
Remove bolt (24) and remove pin assembly (25). The weight of pin assembly (25) is approximately 32 kg (70 lb). Remove shims (26) that are located between stub boom (3) and fore boom cylinder (21). Remove fore boom cylinder (21). The weight of fore boom cylinder (21) is approximately 250 kg (550 lb).
Illustration 15 g00939420
Release latch (28) and swing condenser (27) out of the way.
Illustration 16 g01318178
Remove the bolts. Reposition and secure condenser (27).
Illustration 17 g00939433
Illustration 18 g01318194
Remove bolt (29) from pin assembly (30). Attach Tooling (C) and a suitable lifting device, as shown. Remove pin assembly (30) from stub boom (3). The weight of pin assembly (30) is approximately 102 kg (225 lb). Remove stub boom (3) and shims (31) from the machine. The weight of stub boom (3) is approximately 544 kg (1200 lb).
Illustration 19 g00939435
Illustration 20 g01318242
Remove outer lip seal (32) from the stub boom. Repeat this step for the other side. Use a suitable lifting device and Tooling (D) in order to remove bearing (33) and the inner lip seal. Repeat this step for the other side.
Illustration 21 g00939438
Illustration 22 g01318244
Remove outer lip seal (34) from the stub boom. Repeat this step for the other side. Use Tooling (E) and a suitable lifting device to remove bearing (35) and the inner lip seal. Repeat this step for the other side.


Parts socket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.