SOCKET- 2146604 - Caterpillar

Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01450995
Install manifold (30). Install bolts (29).
Illustration 2 g01450994
Connect hose (28). Tighten clamps (27).
Illustration 3 g01450993
Install screen (27).
Illustration 4 g01448094
Install screen (26).
Illustration 5 g01448093
Install screen (25).
Illustration 6 g01451037
Illustration 7 g01448092
Attach Tooling (A) and a suitable lifting device to panel (23). The weight of panel (23) is approximately 40 kg (90 lb). Install a new gasket and panel (23). Install bolts (22).
Illustration 8 g01448091
Install panel (19). Install bolts (21). Install light (22). Connect harness assembly (20).
Illustration 9 g01448090
Install light (18). Connect harness assembly (17).
Illustration 10 g01448089
Install hydraulic tank (16). Install bolts (15).
Illustration 11 g01448087
Connect hose assembly (14). Install clips (13).
Illustration 12 g01448085
Connect harness assembly (11). Install clips (12).
Illustration 13 g01448082
Install baffle (10). Install nuts (9).
Illustration 14 g01448079
Install hydraulic oil filter (8). Install nuts (8).
Illustration 15 g01448074
Connect tube assembly (5). Install bolts (6). Connect harness assembly (1). Install nut (2). Install sensor (3). Install valve assembly (4). End By:
Install the hydraulic tank. Refer to Disassembly and Assembly , "Hydraulic Tank (Implement, Hydraulic Fan) - Install".