AVSPARE.COM
parts catalog

SOCKET- 3236267 - Caterpillar



3236267 SOCKET- Caterpillar parts SOCKET
Rating:
12
Alternative (cross code) number:
CA3236267
323-6267
3236267
Caterpillar 3236267 SOCKET-
Weight: 0.100 pounds 0 kg.

Buy SOCKET- 3236267 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-5246 Pump As 1
B - Loctite C5A Copper Anti- Seize -
C 525-5184 Hydraulic Jack 1 Start By:
Connect the steering frame lock.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Park the machine on a flat, level surface. Lower the blade to the ground. Chock the wheels to keep the machine from rolling when the parking brake is released.
Illustration 1 g06290637
Use Tooling (C) to remove guard (2). The weight of guard (2) is approximately 29 kg (64 lb). Remove bolts (1) and guard (2).
Illustration 2 g06290638
Apply the parking brake from the cab to release the hydraulic pressure at parking brake actuator (4).
Disconnect hose assembly (3) from parking brake actuator (4).
Illustration 3 g06290639
Typical example
Connect Tooling (A) to parking brake actuator (4), as shown. Use Tooling (A) to release the parking brake.
Illustration 4 g06290640
Remove the cotter pin and clevis pin (6).
Separate yoke assembly (7) from parking brake lever (8).
Remove nuts (5) and the washers. Remove parking brake actuator (4).
Illustration 5 g00546845
Turn Knob (B) on Tooling (A) to release the pressure in the parking brake actuator. Remove Tooling (A) from the parking brake actuator.Installation Procedure
Illustration 6 g06290640
Install parking brake actuator (4), the washers, and nuts (5). Tighten nuts (5) to a torque of 50 10 N.m (37 7 lb ft).
Attach Tooling (A) to parking brake actuator (4).
Use Tooling (A) to apply pressure to parking brake actuator (4) to align yoke assembly (7) with parking brake lever (8).
Apply Tooling (B) to clevis pin (6), parking brake lever (8), and yoke assembly (7). Install clevis pin (6) and the cotter pin.
Illustration 7 g00546845
Turn Knob (B) on Tooling (A) to release the pressure in the parking brake actuator. Remove Tooling (A) from the parking brake actuator.
Illustration 8 g06290638
Connect hose assembly (3) to parking brake actuator (4).
Adjust parking brake actuator (4). Refer to Testing and Adjusting, "Parking Brake Actuator - Adjust" for the proper adjustment of parking brake actuator (4).
Illustration 9 g06290637
Use Tooling (C) to install guard (2). The weight of guard (2) is approximately 29 kg (64 lb). Install guard (2) and bolts (1).End By:
Separate the steering frame lock.


Parts socket Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.