SOCKET 7D2087 - Caterpillar

Removal Procedure
Illustration 1 g03443577
Remove knobs (1) and arm rest (2).
Illustration 2 g03443617
Remove bolts (3) and cover (4).
Illustration 3 g03444099
Loosen nut (6). Remove rod (5), lever (7), and cover (8).
Illustration 4 g03444216
Remove bolt (9) and lever (10).
Illustration 5 g03444217
Disconnect cable assembly (11). Remove bolts (12) and cover (13).
Illustration 6 g03444256
Disconnect harness assemblies (14) and hose assemblies (15).
Illustration 7 g03445316
Relocate harness assembly (16). Remove spring (17), bolt (18), and STIC control assembly (19).
Illustration 8 g03446120
Remove bracket (20).
Illustration 9 g03445577
Remove nut (21), lever (22), nut (23), bearing (24), clip (25), cam (26), clip (27), bearing (28), and shaft (29).
Illustration 10 g03446080
Remove nuts (30) and pilot valve control assembly (31).
Illustration 11 g03446138
Remove bolts (32) and cover (33).
Illustration 12 g03446145
Remove bolts (34) and cover (35).
Illustration 13 g03446157
Remove bolts (36) and joystick assembly (37).
Illustration 14 g03446163
Remove base (38), bracket (39), fittings (40), and bracket (41). Installation Procedure
Install STIC Control (19) in the reverse order of removal.
Tighten bolts (36) to a torque of 50 10 N m (37 7 lb ft).
Tighten bolts (32) and bolts (34) to a torque of 6 1 N m (53 9 lb in).
Tighten nut (23) to a torque of 15 1 N m (133 9lb in).
Tighten nut (21) to a torque of 30 7 N m (22 5 lb ft).
Tighten bolts (16) to a torque of 30 7 N m (22 5 lb ft).
Tighten bolts (12) to a torque of 6 1 N m (53 9 lb in).
Tighten nut (6) to a torque of 8.5 1.3 N m (75 12 lb in).
Tighten bolts (3) to a torque of 6 1 N m (53 9 lb in).