SOCKET-LATCH 9R8537 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Fumes Disposal Filter Element - Replace
Generator - Dry
Generator Set - Test
Rotating Rectifier - Test
Varistor - Test
Voltage and Frequency - Check
Winding - Test
Every Week
Air Inlet Filter - Check
Air Tank Moisture and Sediment - Drain
Automatic Start/Stop - Inspect
Battery Charger - Check
Battery Electrolyte Level - Check
Bearing Temperature - Measure/Record
Cooling System Coolant Level - Check
Electrical Connections - Check
Electrohydraulic System - Inspect
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Clean
Engine Oil Level - Check
Fuel System Fuel Filter Differential Pressure - Check
Generator Load - Check
Jacket Water Heater - Check
Power Factor - Check
Space Heater - Check
Standby Generator Set Maintenance Recommendations
Stator Winding Temperature - Measure/Record
Voltage and Frequency - Check
Walk-Around Inspection
Every 6 Months
Cooling System Coolant Sample (Level 1) - Obtain
Every Year
Aftercooler Condensation - Drain
Alternator - Inspect
Bearing (Ball) - Lubricate
Belts - Inspect/Adjust/Replace
Cooling System Coolant Sample (Level 2) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Crankcase Blowby - Measure/Record
Crankcase Pressure - Measure
Crankshaft Vibration Damper - Inspect
Cylinder Pressure - Measure/Record
Electrohydraulic System Oil - Change
Electrohydraulic System Oil Filter - Change
Engine Air Cleaner Element - Replace
Engine Crankcase Breather - Clean
Engine Mounts - Check
Engine Oil - Change
Engine Oil Filter (Auxiliary) - Change
Engine Oil Filter - Change
Engine Oil Sample - Obtain
Engine Performance - Test
Engine Protective Devices - Check
Engine Speed/Timing Sensor - Clean/Inspect
Engine Valve Lash and Bridge - Adjust
Exhaust Bypass - Inspect
Exhaust Piping - Inspect
Fuel Metering Valve Screen - Check
Gas Pressure Regulator Condensation - Drain
Hoses and Clamps - Inspect/Replace
Ignition System Timing - Check/Adjust
Inlet Air System - Inspect
Insulation - Test
Oxygen Sensor - Calibrate
Radiator - Clean
Starting Motor - Inspect
Stator Lead - Check
Valve Stem Projection - Measure/Record
Water Pump - Inspect
Generator Set - Test
Every 3 Years
Cooling System Coolant (NGEC) - Change
Rotating Rectifier - Check
Turbocharger - Inspect