SOFTWARE GP- 1708151 - Caterpillar

Canopy Machines
When installing or removing the polycarbonate shield, be extra careful to prevent any personal injury. Also, the hydraulic lockout control must be in the RAISED position to prevent any possibility of sudden movement of the machine due to inadvertent contact with the hydraulic controls.
Do not install/remove the polycarbonate shield until the following items have been done:
Park the machine on a level surface.
Lower the work tools and the blade to the ground.
Cycle the joystick controls. Move the hydraulic lockout control to the RAISED position.
Remove the engine start switch key.Perform the following procedure to install the polycarbonate shield.
Illustration 1 g06267035
Put polycarbonate shield (1) with the help of another person into position.
Secure the polycarbonate shield with the four fasteners attached (2).Perform the following procedure to remove the polycarbonate shield.
Remove four fasteners (2).
Remove polycarbonate shield (1) with the help of another person.Note: Protect the polycarbonate shield from damage while in storage.Cab Machines
To provide full ventilation inside the cab, the upper window and the lower window can be fully opened.
Crushing Hazard! Stay clear (extremities, clothing) of the window run and of the window. Always open and close the front window using both handles. Always make sure the window locks into the recesses as the window is open and closed. Be careful not to hit the front window with your head as the front window is opened and closed.Stop the engine before opening or closing the front window in order to avoid any unintentional operation or movement of the machine.
Do not change the position of the front window until the following items have been done:
Park the machine on a level surface.
Lower the work tools and the blade to the ground.
Move the hydraulic lockout control to the RAISED position.Perform the following procedure to vent the upper window.
Illustration 2 g06267076
Release the auto-lock latches by pulling release levers (1) on the window handles.
Holding both handles on the window frame, pull the window upward.
Hold both handles and move the window into the storage position until the auto-lock latches near the ceiling are engaged.Perform the following procedure to close the upper window.
Release the auto-lock latches by pulling release levers (1) on the window handles.
Holding both handles on the window frame, pull the window downward.
Hold both handles and move the window into the closed position until the auto-lock latches near the front of the machine engage.Perform the following procedure to vent the lower window.
Illustration 3 g06267083
Release the auto-lock latches by pushing release levers (2) on the window handles.
Holding both handles on the window frame, pull the window upward.
Hold both handles and move the window into the storage position until the auto-lock latches near the top window are engaged.Perform the following procedure to close the upper window.
Release the auto-lock latches by pulling release levers (2) on the window handles.
Holding both handles on the window frame, pull the window downward.
Hold both handles and move the window into the closed position until the auto-lock latches near the front of the machine engage.