SOFTWARE GP-MONITOR 2138794 - Caterpillar

Illustration 1 g00825868
183-3139 Hydraulic Hand Control Gp (Lift and Tilt) (1) Apply a cyanoacrylate adhesive in the groove on the knob. (2) Apply a cyanoacrylate adhesive in the groove on the knob. (3) Torque for the two screws ... 1.5 0.25 N m (13.00 2.00 lb in) (4) Torque for the jam nut ... 40.0 0.5 N m (30.00 1.00 lb ft) (5) Torque for the locknut ... 25.0 3.0 N m (18.00 2.00 lb ft) (6) Torque for the nut ... 20.0 5.0 N m (15.00 4.00 lb ft) (7) Torque for the nut ... 20.0 5.0 N m (15.00 4.00 lb ft) (8) Torque for the nut ... 20.0 5.0 N m (15.00 4.00 lb ft) (9) Torque for the nut ... 20.0 5.0 N m (15.00 4.00 lb ft) (10) Torque for the nut ... 20.0 5.0 N m (15.00 4.00 lb ft) (11) Torque for the locknut ... 20.0 5.0 N m (15.00 4.00 lb ft) (12) Torque for the locknut ... 25.0 3.0 N m (18.00 2.00 lb ft) (13) Use 2R-0364 Retaining Rings in order to retain the joint and the loader lever. Use 1K-0502 Washers in order to eliminate excessive play.