SOFTWARE GP-IMPLEMENT 2951781 - Caterpillar

Make reference to ANALYZING TURBOCHARGER FAILURE, Form No. FEG45138.(1) End play for shaft (new) ... .002 to .005 in.(0.05 to 0.13 mm)(2) Put 5P3931 Anti-Seize Compound on threads and tighten bolts holding impeller housing to ... 60 lb. in.(6.8 N m)(3) Put 5P3931 Anti-Seize Compound on threads and tighten bolts holding turbine housing to ... 11 to 12 lb. ft.(15 to 17 N m)(4) Maximum permissible gap of oil seal ring, measured in bore of housing ... .007 in.(0.18 mm)(5) See TURBOCHARGER IMPELLER INSTALLATION.(6) Thickness of thrust bearing ... .107 to .108 in.(2.72 to 2.74 mm)(7) Bearing: Bore in housing for bearing ... .7500 to .7505 in.(19.050 to 19.063 mm)Diameter of surface of bearing for housing ... .7460 to .7465 in.(18.948 to 18.961 mm)Diameter of surface of bearing for shaft ... .4415 to .4418 in.(11.214 to 11.222 mm)Diameter of surface of shaft for bearing (journal) ... .4400 to .4403 in.(11.176 to 11.184 mm)Length of bearing ... 2.425 to 2.426 in.(61.60 to 61.62 mm)