SOFTWARE GP-EL 3107996 - Caterpillar

Illustration 14 g00374841
Illustration 15 g00374838
Install spool (23) and spring (22) into valve body (13) .
Illustration 16 g00374837
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install one retainer (21) , spring (20) , the other retainer (21) , and retaining ring (19) onto spool (18) .
Illustration 17 g00374836
Illustration 18 g00374834
Install spool (18) and stop (17) into valve body (13) .
Illustration 19 g00374076
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Position cover (16) and install bolts (15) onto valve body (13) . Tighten bolts (15) to a torque of 30 7 N m (22 5 lb ft).
Illustration 20 g00374075
Position valve body (13) onto plate (14) .
Illustration 21 g00374074
Position manifold (9) onto valve body (13) .
Install bolts (11) into manifold (9) . Tighten bolts (11) to a torque of 30 4 N m (22 3 lb ft).
Install plug (12) into manifold (9) .
Install connectors (10) into manifold (9) .
Use the following procedure in order to assemble the manifold.
Illustration 22 g01435606
Install O-ring seals (8) and the backup rings onto cartridge assembly (7) . Repeat this step for the remaining cartridge assemblies (7) .
Illustration 23 g01435595
Illustration 24 g01435581
Install cartridge assembly (7) onto manifold (4) . Tighten cartridge assembly (7) to a torque of 50 5 N m (37 4 lb ft).
Position coil assembly (6) and the washer onto cartridge assembly (7) . Install locknut (5) . Tighten locknut (5) to a torque of 9.0 0.5 N m (79.66 4.43 lb in).
Repeat Steps 24.b through 24.c for the remaining solenoid valves.
Install harness assembly (2) onto manifold (4) .
Illustration 25 g01435561
Position manifold (4) and harness assembly (2) .
Install bolts (3) . Tighten bolts (3) to a torque of 30 4 N m (22 3 lb ft).
Connect clips (1) that hold harness assembly (2) .End By: Install the transmission control valve. Refer to Disassembly and Assembly, "Transmission Control Valve - Install".